Metal Air filter
AKP-ME?filters are highly effective in significantly reducing oil mist,water mist,
fog or droplets from OSA or recirculated air. In addition,they are useful downstream of?DX or chilled water coils and steam or mist-type humidifiers which allows saturated air?to condense out. Also used in turbine intake and spark arrestance etc.
CONSTRUCTION-AKP-ME are constructed of a 16 gauge galvanized steel frame (standard);
18-gauge type 304 stainless steel optional. There are drain holes equally spaced on all four sides.
The media pack in a 2″ filter is layers of expanded metal,knitted mesh(to allow the
fluid to drain easily),and corrugated wire screen.
PERFORMANCE-The mist eliminator is designed to operate at a face velocity of 500 RPM. The velocity should not exceed 550 RPM.
INSTALLATION-AKM-ME Mist Eliminator must be vertically installed in order to operate at
Mounting hardware must be designed to support the mist eliminator with adequate drainage.
For built-up banks,Airknows Holding Frames can be joined to create a functional system.